{"product_id":"oneup-dropper-post-remote-v2","title":"ידית שליטה למוט אוכף | OneUP V2","description":"\u003cp\u003eA BETTER REMOTE FOR ANY CABLE OPERATED DROPPER\u003c\/p\u003e\n\u003cp\u003eAn Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R\/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.\u003c\/p\u003e\n\u003cp\u003eNO BLEEDING\u003c\/p\u003e\n\u003cp\u003eThe cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.\u003c\/p\u003e\n\u003cp\u003eKit includes cable and housing \u003c\/p\u003e\n\u003cp\u003eCompatible with all cable actuated dropper posts. \u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003eWeight: \u003c\/p\u003e\n\u003cp\u003eRemote with 22.2mm Bar Clamp - 46g\u003cbr\u003eRemote with SRAM Matchmaker X - 43g \u003cbr\u003eRemote with Shimano I-spec-EV - 43g \u003cbr\u003eRemote with Shimano I-spec II - 41g\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eINSTALL INSTRUCTIONS\u003c\/p\u003e\n\u003cdiv\u003e22.2mm Clamp\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLoosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano)\u003c\/li\u003e\n\u003cli\u003eAttach the remote body to the clamp using your preferred mounting hole.\u003c\/li\u003e\n\u003cli\u003eTorque the remote body to the clamp using a 3mm hex to 3Nm\u003c\/li\u003e\n\u003cli\u003eLoosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever\u003c\/li\u003e\n\u003cli\u003eSnug the 22.2mm clamp to 1Nm max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eShimano I-spec II (M9000, M8000, M6000 etc)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the lever mounting bolt completely from the left brake using a 4mm hex\u003c\/li\u003e\n\u003cli\u003eDepress the \"Push to Open\" button using a 2mm hex to fully open the brake lever clamp\u003c\/li\u003e\n\u003cli\u003eRemove the plastic spacer from the inside of the lever clamp\u003c\/li\u003e\n\u003cli\u003eInstall the OneUp I-spec II adapter into the lever clamp\u003c\/li\u003e\n\u003cli\u003eLoosely reinstall the brake lever clamp onto the handlebar\u003c\/li\u003e\n\u003cli\u003eAttach the remote body to the I-spec II adapter using your preferred mounting hole.\u003c\/li\u003e\n\u003cli\u003eTorque the remote body to the I-spec II adapter using a 3mm hex to 3Nm\u003c\/li\u003e\n\u003cli\u003eRotate the OneUp dropper remote until the remote body is parallel to the brake lever.\u003c\/li\u003e\n\u003cli\u003eTorque the brake lever clamp to the manufacturer's recommendation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eShimano I-spec EV (XTR M9100 onward)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the lever mounting bolt completely from the left brake using a 4mm hex\u003c\/li\u003e\n\u003cli\u003eDepress the \"Push to Open\" button using a 2mm hex to fully open the brake lever clamp\u003c\/li\u003e\n\u003cli\u003eInstall the OneUp supplied T-nut into the curved recess on the hinged clamp\u003c\/li\u003e\n\u003cli\u003eReinstall the brake lever clamp onto the handlebar\u003c\/li\u003e\n\u003cli\u003eInstall the OneUp supplied IS-EV adapter onto the T-nut\u003c\/li\u003e\n\u003cli\u003eAttach the remote body to the IS-EV adapter using your preferred mounting hole.\u003c\/li\u003e\n\u003cli\u003eTorque the remote body to the IS-EV adapter using a 4mm hex to 3Nm\u003c\/li\u003e\n\u003cli\u003eRotate the OneUp dropper remote until the remote body is parallel to the brake lever.\u003c\/li\u003e\n\u003cli\u003eTorque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSRAM Matchmaker X\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eRemove Brake lever mounting screw and hinged clamp using a T25 Torx\u003c\/li\u003e\n\u003cli\u003eInstall the OneUp supplied T-nut into the curved recess on the hinged clamp\u003c\/li\u003e\n\u003cli\u003eReinstall the brake lever clamp onto the handlebar\u003c\/li\u003e\n\u003cli\u003eInstall the OneUp supplied Matchmaker X adapter onto the T-nut\u003c\/li\u003e\n\u003cli\u003eAttach the remote body to the Matchmaker X adapter using your preferred mounting hole.\u003c\/li\u003e\n\u003cli\u003eTorque the remote body to the Matchmaker X adapter using a 3mm hex to 3Nm\u003c\/li\u003e\n\u003cli\u003eRotate the OneUp dropper remote until the remote body is parallel to the brake lever.\u003c\/li\u003e\n\u003cli\u003eTorque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"OneUP","offers":[{"title":"Default Title","offer_id":39499267899578,"sku":"1C0514","price":225.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0409\/9109\/products\/36.png?v=1766304817","url":"https:\/\/leatt-protectives.myshopify.com\/products\/oneup-dropper-post-remote-v2","provider":"Zilka Sport","version":"1.0","type":"link"}